Migo MM50 Flash File MTK6261 100% Tested (Frimware)

Card found : S/N : E328BB2F , v0161

Chinese Miracle II  [MTK module] v 1.58

 

Operation : Read Flash [ v1.58 ]

 

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey ( '*' )

 

Wait for phone...

Phone found! [ 5 ]

Sync...

Sync Ok, read regs...

Inital regs read done

Boot Info :

BB_CPU_ID : 6261

BB_CPU_HW : CB01

BB_CPU_SW : 0001

BB_CPU_SB : 8000

BB_CPU_NM : [MediaTek] MT6261_S0000

BB_CPU_SN : C9D83165F698A94F27FB87686B54F7FF

BROM Protocol Version : 05

Setting...

Setting done , result code 0x000E

BROM stage done

Seek and prepare DownloadAgent

DownloadAgent matching HW Found!

DA verify and select done

Sending DA to target ...

DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E

SOC_VERIFY : 0xC1

BOOT_STYLE : SF_FLASH_BOOT

NOR Flash IC initialized

[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV

[0] : FLASH_DIE : 00EF 0070 0016 0000

[0] : FLASH_LEN : 0x00400000

SDS_INFO : 0x003FE000 , 0x00002000

INT_RAM : 0x0000D000

EXT_RAM : 0x00400000

Reading Flash Content now ...

 

Read Flash now

Read Ok , 4194304 bytes read

Check and collect compile info

File_Info   : FARSIGHTED61D_11C_PCB01_gprs_MT6261_S00.MIGO_MM50_V10.bin

FileVersion : Migo_MM50_V10

Saved to : C:\InfinityBox\CM2MTK\Read_out\FARSIGHTED61D_11C_PCB01_gprs_MT6261_S00.MIGO_MM50_V10.bin

 

Done!

Elapsed: 00:00:18

Reconnect Power/Cable!

 

 

WHAT SOFTWARE ISSUE WILL BE FIXED ?

·         Hang on Logo Fix

·         Dead Phone Fix

·         Black Or White Display Fix

·         Pin Code Remove

·         Privacy Code Unlock

·         Password Unlock

·         Any Software Issue?

 

FARSIGHTED61D_11C_PCB01_gprs_MT6261_S00.MIGO_MM50_V10

Download  Now

ফাইল কাজ না করলে টাকা ফেরত পাবেন ।

Call Me :01304638606 (Only Paid Sarvice )

Whatsapp: 01740115502

 

How to Flash Stock Rom Miga MM50 Phone:
   

 ·         Download The Migo MM50 Flash File Firmware.

·         Install The Migo MM50 USB Driver On Your Computer If You Don’t Already Have One.
 
·         Open The Migo MM50 Flash Tool ( CM2 / Miracle Box ).
 
·         Remove And Reinsert The Migo MM50 Battery.
 
·         Select The Downloaded Flash File In The Tool And Click “Write Flash”.
 
·         Connect Your Mig0 MM50 To Your Computer With a USB Cable And Press The Boot Key.
 
·         The Migo MM50 Will Now Start Flashing. This May Take Up To 5 Minutes.
 
·        Wait For The Flashing Process To Reach 100% Completion.
 
·        Flashing Is Now Complete ! The Migo MM50 Has Been Successfully Flashed.
 

WARNING :

Before Flash Take A Backup Your Personal Data After Doing Flash Firmware Your All Personal Data Will Be Erased. and if you Are Technician We Always Advice to You Make A Backup Full Rom Then Proceed Any Operation.